Intended Equipment Use; Cyber Security Disclaimer; Categorization By Frame Size And Option Code - ABB ACS580MV Hardware Manual

22 Introduction to the manual

Intended equipment use

Those in charge of the drive must ensure that the drive is only used as specified in the
contractual documents, operated under the conditions stipulated in the technical
specifications and on the rating plate of the drive, and serviced in the intervals as specified
by ABB.
Use of the drive outside the scope of the specifications is not permitted.
Intended equipment use also implies that only spare parts recommended and approved by
ABB must be used.
Unauthorized modifications and constructional changes of the drive are not permitted.

Cyber security disclaimer

This product is designed to be connected to and to communicate information and data via
a network interface. It is Customer's sole responsibility to provide and continuously ensure
a secure connection between the product and Customer network or any other network (as
the case may be). Customer shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB and its
affiliates are not liable for damages and/or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and/or theft of data or information.

Categorization by frame size and option code

Some instructions, technical data and dimension drawings which concern only certain
frame sizes are marked with the symbol of the frame size (e.g. 6R6, 10R6). The frame size
is not marked on the rating plate. To identify the frame size of your drive, see the Technical
Data.