Program Overview - Siemens SINUMERIK 840D Operator's Manual

4
Machine Operating Area
4.6 Automatic mode

4.6.2 Program Overview

Program
overview
Selection
Alter
enable
Work-
pieces
Part
programs
4-142
Function
After selection of a workpiece or program overview, individual
workpieces or programs can be enabled or disabled for execution.
Operating sequence
"AUTO" mode is selected in the "Machine" operating area.
The appropriate channel is selected.
The channel is in reset state.
The workpiece/program to be selected is in the memory.
An overview of all workpiece directories/programs that exist is
displayed.
Position the cursor on the desired workpiece/program.
Vertical softkeys
Select the workpiece/program for execution:
The name of the selected workpiece is displayed on the screen in field
"Program name" at the top. The program is also loaded and selected
for processing.
The selected workpiece/program is enabled (X) or disabled (no "X").
A selection can only be made when the workpiece/program is
enabled.
Explanation of other softkeys:
All programs of a particular type are displayed via the horizontal
softkeys:
Display of all workpiece directories
Display of all existing part programs
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
4
03.04
Ó Siemens AG, 2004. All rights reserved