Siemens SINUMERIK 840D Operator's Manual page 211

5
03.04
Tool ma-
nagement
Magazine
list
Load
Manual data input
(with search for empty
location)
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Other information
You can parameterize a filter for loading tools into the lists. A list
display appears for which you can parameterize a filter for the tool
number, duplo number and tool type. The list then displays the tools in
the tool cabinet that meet the filter criteria. By selecting it from the list,
you accept the tool.
Sequence of operations (loading from the "Magazine list")
Select softkey "Tool management".
The "Magazine list" is displayed.
The horizontal and vertical softkey bars change.
The "Magazine list" is selected.
The appropriate magazine is selected.
Press the "Load" softkey.
The vertical softkey bar changes again.
If you want to enter data directly in the table, you must first find a
suitable empty location in the magazine.
There are four methods by which you can find an empty location for
different tool sizes in combination with location types:
1. Directly in the magazine list ("Manually").
2. Via a user-defined location
e.g. "oversize" (name configured by machine manufacturer)
3. Via the "Find empty location" softkey
4. Via the "To loading point" softkey
Other information
Values are checked for validity when you enter a tool type in the lists.
Only known tool types are permitted.
Searching directly in the magazine list
Position the cursor on the location of your choice in the magazine list.
Search via user-defined location (example)
The assignment of the softkeys is configured by the machine
manufacturer.
"Parameters" Operating Area
5.3 Tool management
5
5-211