6
"Program" Operating Area
6.9 Program simulation
6-322
2. If individual programs are simulated, the machining list default
produces the correct simulation sequence even if menu item
"Channel/spindle" is not selected (and therefore without applying
the overlay principle).
3. With the correct password you can define manufacturer-specific
default setting values with "Change default" under menu items
"Channel settings" and "Spindle settings", which then apply
globally for all new workpieces.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6
03.04
Ó Siemens AG, 2004. All rights reserved