Siemens SINUMERIK 840D Operator's Manual page 440

9
"Startup" Operating Area
9.1 Machine data
Delete
password
Change
password.
9-440
Press softkey "Delete password".
After pressing the "Delete password" softkey the valid password is
deleted and deletion is acknowledged. The currently valid access
level: keyswitch position 0 is set.
If one of the three default passwords is set, proceed as follows to
change them. Press the "Change password" softkey. The input box
appears.
"Change password".
Access level
· System
· Manu-
facturer
· Service
· User
The modified password must be confirmed in both input fields then
confirmed by pressing softkey "OK". Both entered passwords must
match for the modified one to become valid.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Please enter new password:
Please confirm password:
Ó Siemens AG, 2004. All rights reserved
9
03.04