Pc Format - Siemens SINUMERIK 840D Operator's Manual

7
"Services" Operating Area
7.3 Formats for saving and importing data
Search strategy when no
path is named
File name
in tape format
%*_INI
%_N_*_XXX
%MPFn
%SPFn
%Ln
%*
Examples
7-370
If no path is named in the punched tape format, the specified file
name must be interpreted when the file is read into the control so that
the file can be stored at a suitable position in the file tree.
Files are stored in the file tree according to the following strategy:
Converted Interpreted
internal file name internal path
_N_*_INI /_N_NC_ACT_DIR
_N_*_XXX /_N_XXX_DIR
_N_MPFn_MPF /_N_MPF_DIR
_N_SPFn_SPF /_N_SPF_DIR
_N_SPFn_MPF /_N_SPF_DIR
_N_*_MPF /_N_CLIP_DIR
* = any file name
n = any program number (e.g. MPF123)
· The search strategy is applied only if no path has been named.
Paths detected using the search strategy are otherwise overwritten
by the ";$PATH=" statement.
· Spaces in the name are ignored.
1. *.MPF files
· PC format:
Part program
%MPF123
· Punched tape format:
Part program
%_N_MPF_MPF
2. *.INI files
· PC format:
Part program
%COMPLETE_TEA_INI
· Punched tape format:
Part program
%_N_COMPLETE_TEA_INI
3. Part programs with name which cannot be assigned
· PC format:
Part program
%HUGO
· Punched tape format:
Part program
%_N_HUGO_MPF
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
03.04
Stored
TF_xx.COM in directory
NC active data
XXX /_N_NC_DIR
Part programs
Subroutines
Subroutines
Clipboard
Directory: Part program
(/_N_MPF_DIR)
Directory: Part program
;$PATH=/_N_MPF_DIR
Directory: NC active data
(/_N_NC_ACT_DIR)
Directory: NC active data
;$PATH=/_N_NC_ACT_DIR
Directory: Clipboard
(/_N_CLIP_DIR)
Directory: Clipboard
;$PATH=/_N_CLIP_DIR
Ó Siemens AG, 2004. All rights reserved
7