6
03.04
6.5.10 Examples of user-defined contour programming
Example 1
Workpiece drawing of contour
Element
Softkey
1
2
3
4
5
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Starting point:
X=5.67 abs., Y=0 abs., machining plane G17
The contour is programmed in a counter-clockwise direction.
X= - 137.257 abs.
43.972
Y
Parameters
All parameters, a1=180 degrees
X=-43.972 inc, all parameters
X=-137.257 abs
a1=-125 degrees
X=43.972 inc
a1=-55 degrees
X=5.67 abs
CW direction of rotation,
R=72, X=5.67 abs., Y=0 abs.,
Select dialog
"Program" Operating Area
6.5 Free contour programming
Starting point
X=5.67 Y=0
125°
X
Observe angles in help screen!
Definition of coordinates in X in "abs"
and in "inc"
Observe angles in help screen!
Definition of coordinates in X in "inc"
Observe angles in help screen!
6
R72
Remarks
6-295