Service and maintenance
8.1 Overview
Alternative: Load the project to the CF card using a card reader
1)
See SW compatibility list (https://support.industry.siemens.com/cs/ww/en/view/18857317)
2)
The versions of SINAMICS Integrated and Controller Extensions are upgraded automatically in the HW Config during
3)
device replacement
The technology packages are updated automatically. The user can directly specify a TP
4)
SINAMICS components are upgraded/downgraded to the component version of the CF card. Ensure that LED codes
5)
are observed. After the upgrade it is necessary to switch the device off and on.
Figure 8-1
Overview of upgrade options
340
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION D4x5-2