Toshiba ST-B10 Series Maintenance Manual page 111

5. DIAGNOSTIC TEST OPERATION
5.4.8.2 TRST-A1x Serial Printer Test
In this test, printing and error detection of the printer connected to the POS terminal are checked. If selecting
Port No. to which another device is connected, performing the "Sample Printing" or the "Receipt Cut" may
cause the POS terminal to lock up. Please be sure to specify the Port No. to which the printer is connected.
(1) Operation procedure
1. Select the TRST-A1x-S Test(6) button on the Printer Test Menu screen.
2. Specify Port No. and Baud rate of the printer by clicking the radio button on the screen.
3. By clicking the Sample Printing(1) button, sample printing is performed. ("Printer Test" and 1-line
printing are printed on the receipt.)
4. After the sample printing ended, move the cursor onto the Cut Count edit box, then input a value.
5. By clicking the Receipt Cut(4) button, the receipt cut is performed according to the number of Cut
Count value set in Procedure 4.
6. When the printer performs correctly, click the OK button to terminate the test. If not, click the NG
button.
(2) Error code
Result Error Code
1
-1
-1
-1
-1
-1
<< Preliminary version >>
Error Code Ex
0
0
1
2
3
4
0 Click the [OK] button to terminate the test.
0 Click the [NG] button to terminate the test.
0 Open error
0 Print error
0 Receipt cut error
0 DSR check error
5- 49
5.4 Serviceman Diagnostic Test Program
Remarks
EO18-12017