Table of Contents
Advertisement
5. DIAGNOSTIC TEST OPERATION
5.4.9.1 Time Setup
Date and time setting is performed here. This setting will be activated in the BIOS also.
(1) Operation procedure
1. Select the Time Setup(1) button on the System Information Menu screen.
2. Move the cursor onto an edit box in which value will be altered, click on the edit box, then input a value.
3. Click the Setting button, then make sure that altered date and time are displayed.
The result of the setting is displayed under the Date edit box as shown below.
When the date and time are effective:
When they are ineffective:
4. Click the END button to terminate this test.
(2) Error code
Result
Error Code
0
(3) Corrective action
When the date and time are ineffective, "Time Setup Error!" is displayed. In this case, retry to set the data
and time by inputting the following effective values. (Refer to (1) Operation procedure, Procedure 2.)
Effective value range
Year:
1970 and after
Month:
1 through 12
Day:
1 through 31
Hour:
0 through 23
Minute:
0 through 59
Second:
0 through 59
<< Preliminary version >>
Error Code Ex
0
"Time Setup OK!" is displayed.
"Time Setup Error!" is displayed.
0
Click the [OK] button to terminate the test.
5- 54
5.4 Serviceman Diagnostic Test Program
Remarks
EO18-12017
Advertisement
Table of Contents
