Toshiba ST-B10 Series Maintenance Manual page 51

4. BIOS SETUP
(13) Power Management Setup Menu
ACPI function
ACPI Suspend Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
Modem Use IRQ
Soft -Off by PWRBTN
Run VGABIOS if S3 Resume
Ac Loss Auto Restart
Wake On Touch(RI)
WDRT Support
WDRT Run/Stop
×
WDRT Count
×
Wakeup Event Detect
▼
↑↓→←:Move
F5:Previous Values
*: X mark above shows its readings don't have any meaning and can't be changed when it's linked to other items.
Setup Item
ACPI function
ACPI Suspend Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
Modem Use IRQ
Soft-Off by PWRBTN
Run VGABIOS if S3 Resume
Ac Loss Auto Restart
Wake On Touch(RI)
WDRT Support
WDRT Run/Stop
WDRT Count
Wakeup Event Detect
Phoenix - AwardBIOS CMOS Setup Utility
Advanced
Power Management Setup
Enter:Select +/-/PU/PD:Value
F6:Optimized Defaults
Selective Item (Default setting is indicated by boldface.)
Enabled Auto-setup (not changeable).
S1(POS) Auto-setup (not changeable).
User Define / Min Saving / Max Saving
Disable / 1 Min - 15 Min (1Min Step)
Disable / 1 Min / 2 Min / 4 Min / 6 Min / 8 Min / 10 Min / 20 Min / 30 Min /
40 Min / 1 Hour
Always On / Suspend -> Off
Blank Screen / V/H SYNC+Blank / DPMS Support
NA / 3 / 4 / 5 / 7 / 9 / 10 / 11
Delay 4 Sec / Instant-Off
Auto / Yes / No
Off / On / Former-Sts
Disabled / Enabled
Disabled / Enabled
Run / Stop (Able to be selected when WDRT Support has been changed
to Enabled)
240 unit : second
Min=0 Max=1023 Key in a DEC number : (Selectable only when WDRT
Support is set to Enabled)
To sub-menu
4.3 BIOS Setup Screen Configuration and Default Setting
Enabled
S1(POS)
[User Define]
[Disable]
[Disable]
[Suspend -> Off]
[V/H SYNC+Blank]
[3]
[Delay 4 Sec]
[Auto]
[Off]
[Enabled]
[Disabled]
[Run]
[240]
F10:Save ESC:Exit
4-20
Item Help
Menu Level ►
F1:General Help
EO18-12017