Bios Setup; General; Basic Operation And Keys Used - Toshiba ST-B10 Series Maintenance Manual

4. BIOS SETUP

4. BIOS SETUP

4.1 General

To change the setup programming procedure for the ROM-BIOS, press the [F2] key when the BIOS is started up
(after completing the memory check).

4.2 Basic Operation and Keys Used

4.2.1 How to Enter Phoenix Award BIOS Setup
Press the [F2] key immediately after the memory capacity and the cache memory capacity are displayed at the
system start up. The following is the display sample shown at the system start up.
CN7_S10 Vx.xx xx/xx/xxxx
Main Processor : VIA C7 1.50GHz(100x15.0)
Memory Testing : 457664K OK + 64M shared memory
DDR DIMM Speed : 533
DDR DIMM Data Width : 64-Bit, Single Channel
Detecting IDE Drives ......
SATA HDD: WDC800BEVS-22VAT0 11.01A11 SATA
4.2.2 Table of the Function Keys
The following are the keys usable on the BIOS setup screen and respective functions.
Key
ESC
↑   ↓   →  ←
Enter
+ -
PageUp
PageDown
F1
F10
Phoenix –AwardBIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2009, Phoenix Technologies, LTD
Press <F2> to enter SETUP
01/14/2010-CN700-8237S-8A7L600KC-00
Returns to the previous menu.
On the top menu, leads to the exit menu from BIOS setup.
Moves the cursor.
Displays the sub menu of the item marked with ►.
Displays selection menus for Setup Items.
Selects a value for Setup Items.
Displays Help.
Saves the setup values.
Description
4- 1
EO18-12017
4.1 General
75