Checks; Tapes; Notes For Installation - Toshiba ST-B10 Series Maintenance Manual

Hide thumbs Also See for ST-B10 Series:

Table of Contents

1. UNPACKING

1.2 Checks

Check for the damage or scratches on the machine.

Remove all the tapes from the POS terminal.

Allow an 80 mm at the left side, rear side and front side of the POS terminal and 20 mm at the right side of

the POS terminal so as not to block the ventilating slits and the fan.

(Since heat is built up inside the POS terminal during operation, the ventilating slits and the fan are provided

to vent the internal air.)

When installing the display unit on the top cover, the following conditions must be satisfied.

• Display unit weights 12kg or less.

• The base of the display unit has no protrusions that might damage the top cover.

• The base of the display unit is kept within the top cover.

1- 2

EO18-12017

1.2 Checks

Table of Contents