Toshiba ST-B10 Series Maintenance Manual page 69

5. DIAGNOSTIC TEST OPERATION
In the DIAG TEST MENU dialog box, buttons below are assigned. By selecting a button, sub menu dialog box or
test dialog box will appear.
Button
Display Test
Keyboard Test
I/O Communication Test
LIU Test
Scanner Test
Printer Test
System Information
END
<< Preliminary version >>
By selecting this button, Display Test Menu screen appears.
The following tests are contained in this menu.
• VGA Test
• Touch Panel
• Calibration
By selecting this button, Keyboard Test Menu screen appears.
The following tests are contained in this menu.
• PKBST-50 Test
• PKBST-52 Test
• LKBST-65 Test
• POS-K/B EP ROM Setting
• USB IDCR Test
• TFTST-76 IDCR Test
• ST-A20 IDCR Test
By selecting this button, I/O Communication Test Menu screen appears.
The following tests are contained in this menu.
• Drawer Test
• LAN Test
• Buzzer Test
• COM Loopback Test
• iButton Test
By selecting this button, LIU Test Menu screen appears.
The following tests are contained in this menu.
• LIUST-51 Serial Test
• WD-111 Serial Test
By selecting this button, Scanner Test Menu screen appears.
The following test is contained in this menu.
• RS Scanner Test
(The ST-B10 series doesn't support the scanner made by TTEC.)
By selecting this button, Printer Test Menu screen appears.
The following tests are contained in this menu.
• TRST-A1x Parallel Printer Test
• TRST-A1x Serial Printer Test
• TRST-A1x USB Printer Test
By selecting this button, System Information Menu screen appears.
The following tests are contained in this menu.
• Time Setup
• LAN Setting
• Sensor Information
By selecting this button, a dialog box proceeding the termination will appear.
Description
5- 7
5.4 Serviceman Diagnostic Test Program
EO18-12017