Replacing A Sim Card - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Procedure
Step 1 Remove the 4G antenna cables and RF_Z antenna cables connected to the ports
on the ECC800-Pro, as shown in
Figure 6-9 Removing antennas
Step 2 Install the spare 4G antenna cables and RF_Z antenna cables in the original
positions and connect them to the ECC800-Pro.
----End

6.4.3.4 Replacing a SIM Card

Prerequisites
●
●
Procedure
Step 1 Record the position of the signal cable connected to the ECC800-Pro main control
module panel, and then disconnect the signal cable.
Step 2 Loosen the screws on both sides of the ECC800-Pro main control module.
Step 3 Pull the handles on both sides of the ECC800-Pro main control module, and to
remove the main control module.
Figure 6-10 Removing the ECC800-Pro main control module
Issue 02 (2021-06-30)
Tools: ESD wrist strap, ESD gloves
Materials: A spare SIM card of the same model are available and functional.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-9.
6 O&M
188