Key Hardware Devices; Ecc800-Pro; Product Configuration - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
●
●
●

3.4.3 Key Hardware Devices

3.4.3.1 ECC800-Pro

3.4.3.1.1 Product Configuration

The ECC800-Pro data center controller is used to monitor the devices and
environment in the smart module. It consists of the power module and main
control module. You can insert and remove the power module.
Figure 3-7 ECC800-Pro
(1) Power module
Table 3-9 ECC800-Pro environmental specifications
Item
Operating
temperature
Storage temperature
Relative humidity
Altitude
Table 3-10 ECC800-Pro structural specifications
Item
Dimensions (L x W x H)
Issue 02 (2021-06-30)
Supports the aisle emergency ventilation linkage logic. The cabinet doors are
opened by default under linkage.
If the protected area of the fire extinguishing system is inside the smart
module, when a smoke alarm is generated, the door of the linked cabinet
does not open. If the door is opened, an alarm (door open alarm) is
generated.
If the protected area of the fire extinguishing system is outside the smart
module, when a smoke alarm is generated, the rear door of the linked cabinet
is opened.
Copyright © Huawei Technologies Co., Ltd.
(2) Main control module
Specifications
–20°C to +50°C
–40°C to +70°C
5%–95% RH (non-condensing)
0–4000 m (When the altitude is between 3000 m and
4000 m, the temperature decreases by 1°C for each
additional 200 m.)
Specifications
442 mm x 330 mm x 43.6 mm
3 System Architecture
28