Installing Monitoring Devices; Installing The Sim Card And Antenna - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Figure 4-15 Installing rPDUs
----End

4.2.6 Installing Monitoring Devices

4.2.6.1 Installing the SIM Card and Antenna

If a subscriber identity module (SIM) card and an antenna are configured, perform
the following steps to install them.
Procedure
Step 1 Record the positions of the signal cables connected to the panel of the ECC800-
Pro main control module, and then disconnect the signal cables.
Step 2 Remove the ECC800-Pro main control module, and then insert the SIM card into
the left slot of the ECC800-Pro main control module.
The SIM card needs to support LTE, WCDMA, or GSM.
Figure 4-16 Removing the ECC800-Pro main control module
Issue 02 (2021-06-30)
NO TE
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
71