Huawei FusionModule500 Smart User Manual page 134

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
4.
5.
Step 5 Commission the cabinet electronic clasp locks.
Table 5-14 Function check
Function
View
cabinet
electroni
c clasp
lock
informati
on
Change
the
cabinet
electroni
c clasp
lock
name.
Remotely
open a
cabinet
electroni
c clasp
lock
Issue 02 (2021-06-30)
Path
Click Test Connect to check whether the connection between the cabinet
electronic clasp lock and the ECC800-Pro is normal.
– If the connection is normal, click Confirm. The connected devices are
displayed in the Number of connected devices list.
– If the connection is abnormal, check whether the device is properly
connected to the ECC800-Pro, whether the device and the ECC800-Pro are
running properly, and whether the parameter settings are consistent with
the device parameters.
Repeat Step 4.3 and Step 4.4
Path
Choose
Monitoring >
Cabinet >
Global
cabinet >
Cabinet
Electronic
Clasp Lockn.
Copyright © Huawei Technologies Co., Ltd.
Parameter Setting
Communicat COM2
ions Port
Device Enter the actual device address of
Address the cabinet electronic clasp lock.
to connect other cabinet electronic clasp locks.
Operation
Click the View the running information
Running Info about cabinet electronic clasp
tab. lock 1 on the WebUI.
Click the Change the cabinet electronic
Running clasp lock name.
Parameters tab.
Click the Select Open the door on
Controls tab. Controls, and click Submit to
remotely open the door.
5 Power-On Commissioning
125