Configuring Event Notification - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
If the door still cannot be opened or closed properly, check the following items:
● Whether cables are connected correctly
● Whether the DIP switch setting is correct
----End

5.3.9 Configuring Event Notification

You can set alarm notification by email or SMS as required. Information about a
maximum of 20 users who will receive alarm notification can be displayed.
Prerequisites
To implement alarm notification by SMS, the following conditions must be met:
●
●
Procedure
Step 1 Choose System Settings > Event Notification.
Step 2 Set related outbox parameters.
1.
Issue 02 (2021-06-30)
Figure 5-10 Removing the fastener
NO TICE
The ECC800-Pro is configured with a 4G module and supports standard SIM
card access.
The ECC800-Pro is connected to a network with an email server through a
WAN port. Both the Internet and local area network (LAN) are supported.
NO TE
To use the WeChat notification function, connect the ECC800-Pro to the EDCM system. For
details, see the user guide of the EDCM system.
Set related parameters in the Outbox Settings area on the Mailbox Settings
page. If the address type of the outbox is Domain name, choose System
Settings > System Parameters, and set related parameters in the DNS
Server Address area on the Monitor IP page.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
127