Huawei FusionModule500 Smart User Manual page 95

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
6.
7.
Issue 02 (2021-06-30)
Figure 4-41 Installing the SATA cable and power cable
(1) SATA cable
NO TE
When the VCN510 is delivered, the SATA cable connecting to the hard disk is fixed using
blue tapes. Before installing the hard disk, remove the tapes.
Install a disk in No. 1 position. Place the disk above the No.1 disk installation
position. Align the preinstalled screws with the cucurbit holes on the bottom
cover of the chassis. Then, horizontally place the disk. Ensure that the screws
are in the holes.
Figure 4-42 Disk installation positions
(1) No. 1 disk installation position
Push the hard disk in the direction shown in the following figure to enable the
two preinstalled screw heads to slide into the cucurbit holes.
Copyright © Huawei Technologies Co., Ltd.
4 Installation Guide
(2) Power cable
(2) No. 0 disk installation position
86