Huawei FusionModule500 Smart User Manual page 101

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
6.
7.
8.
Cable Binding Requirements
Bind cables reliably along the route and ensure that the binding interval meets the
requirements in
Table 4-7 Cable binding interval
Cable Diameter (mm)
< 10
10–30
> 30
1.
2.
3.
Issue 02 (2021-06-30)
Keep cables far away from heat sources such as radiators and heat vents. If
unavoidable, take heat resistant measures.
Keep cables far away from operating components such as fan blades and do
not bind cables to an airflow path of fans.
Prevent rotating components such as doors from squeezing or pulling cables.
Table 4-7.
Bind cables with a moderate force and ensure that cables are not misshapen
to prevent compromising the signal quality.
After binding cables, cut off the excess parts of cable ties and trim away any
burrs, as shown in Figure
Figure 4-53 Cutting off the excess part of a cable tie
Do not use cable ties at a place where the cables are bent. Otherwise, the
cable cores may break due to strong stress, as shown in
Figure 4-54 Binding cables in a bending area
Copyright © Huawei Technologies Co., Ltd.
Binding Interval (mm)
150
200
300
4-53.
4 Installation Guide
Figure 4-54.
92