Notes On Warranty; Target Group; Conventions - Siemens SIPROCESS GA700 Operating Manual

Introduction

1.3 Notes on warranty

1.3 Notes on warranty
The content of these instructions is neither a part of a previous or existing agreement,
promise or legal relationship, nor is it intended to modify these. All obligations on the part of
Siemens AG are contained in the respective sales contract, which also contains the
complete and solely applicable warranty conditions. Any statements contained in this
documentation do not create new warranties or restrict the existing warranty.
The content reflects the technical status at the time of publishing. We reserve the right to
make technical changes in the course of further development.
1.4

Target group

This document is intended for all persons using the modular device for continuous
monitoring of process gases in an industrial environment. This specifically includes:
● Measurement technicians
● Plant operators
● Maintenance staff
● Service personnel
1.5

Conventions

Overview
To allow easier navigation within this documentation, the tables below provide information on
the use of markups and terminology.
Table 1- 2
Representation
type
"Add screen"
"File > Edit"
<F1>, <Alt+P>
12
Conventions on markups
Scope
Terminology that appears in the user interface, for example, dialog names,
•
tabs, buttons, menu commands
Required inputs, for example, limits, tag values.
•
Path information
•
Operational sequences, for example, menu commands, shortcut menu com-
mands.
Keyboard operation
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05