Siemens SIPROCESS GA700 Operating Manual page 275

Error ID
F1027
F1029
F1030
F1031
See also
Overview of logbook (Page 209)
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Alarm, error, and system messages
7.5 Wizard-based error messages
Message text (cause/remedy)
"F1027: The component calibration was not suc-
cessful because the total calibration or another
component calibration has failed.
Check the other component calibration or the
total calibration. This component can only be
successfully calibrated after troubleshooting."
"F1029: The validation tolerances of the zero gas
and span gas has been violated.
Calibration necessary."
"F1030: The validation tolerance of the zero gas
has been violated.
Calibration necessary."
"F1031: The validation tolerance of the span gas
has been violated.
Calibration necessary."
275