Siemens SIPROCESS GA700 Operating Manual page 250

Functions
6.27 [4] Communications
3. Authorize access with Standard PIN.
The parameter display of the MODBUS digital input is opened.
4. Set the trigger: "DI active for" parameter box.
The digital input can be enabled for "High" or "Low" signals.
5. Select function (pre-selection):
– When you select the function (pre-selection) "Free", no additional displays or
– If you make different function pre-selections, you must assign a function to the digital
6. Assign function: "Function" parameter field.
7. Complete parameter assignment:
Additional display or parameter fields are displayed, depending on the function:
Function (pre-
selection)
Measuring range
...with message refer-
See also
Setting digital inputs (Page 148)
Linking digital inputs (Page 150)
MODBUS TCP digital inputs (Page 224)
MODBUS interface for SIPROCESS GA700 (Page 284)
250
parameter fields are shown.
input.
Function
Calibration pool
Measuring range 1 to 4 Select component designation
Autom. measuring
...with message refer-
ence
Display/Parameter assignment
Calibration n Parameter assignment of calibration n is dis-
played.
range
Enter free text.
ence
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05