Undo Function; Undo Overview - Siemens SIPROCESS GA700 Operating Manual

Operation
4.2 Keyboard
HELP and UNDO keys
Table 4- 6
Keys
See also
Keyboard (Page 55)
[2.01] Settings >Display/USER FUNC key (Page 98)
4.2.3

UNDO function

4.2.3.1

UNDO overview

The <UNDO> button gives you the option to undo up to ten user actions that have already
taken place. User actions are individual operator inputs or input sequences.
58
Functions of the HELP and UNDO keys
Function
<HELP>
Press this key to open or close the help window which displays
help for selected parameters.
<UNDO>
Press this key to undo up to ten user actions one after the other.
User actions are either individual parameter changes or input se-
quences when running a wizard.
When editing windows are open: The original parameter as-
•
signment is restored by pressing this key.
The first time you press this key you open the window of the
•
last action.
Press the key again to restore the original parameter value.
•
You can repeat this procedure until you reach the maximum num-
ber of actions.
For further information go to → UNDO function (Page 58).
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05