(14) Remove one E-ring, and then take off the
knob and pin.
(15) Remove one clip, and then take off the bush-
ing.
(16) Remove one E-ring, and then take off the
pulley and pin.
(17) Remove one clip, and then take off the bush-
ing. Take off the feeding roller and transport
guide.
[B] Junction roller
(1)
Take off the junction box unit.
P.4-13 "[A] Junction box unit"
(2)
Remove one E-ring, and then take off the
gear and pin.
(3)
Remove one clip, and then take off the bush-
ing.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Transport guide
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 40
Clip
Bushing
Pin
Knob
Fig. 4-110
Feeding roller
Bushing
Clip
Pin
Pulley
Fig. 4-111
Clip
Bushing
Pin
Gear
Fig. 4-112