Toshiba MJ-1104 Service Manual page 144

[C] Saddle transport motor (M16)
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 2 screws, and then take off the
motor cover.
(3) Remove 2 screws, and then take off the
motor bracket.
(4) Remove 3 screws, and then take off the 3
spacers, 3 screw dampers, earth plate,
motor damper and saddle transport motor.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Motor bracket
Saddle transport motor
Motor damper
Motor bracket
Screw damper
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 76
Motor cover
Fig. 4-213
Fig. 4-214
Earth plate
Screw damper
Spacer
Spacer
Fig. 4-215