Toshiba MJ-1104 Service Manual page 163

[F] Paper pusher home position sensor (S6)
(1) Take off the stationary tray.
 P.4-1 "[A] Stationary tray"
(2) Close the buffer unit-1.
(3) Remove 2 E-rings, and then take off the
bushing to remove the paper pusher cam
while pressing the paper pusher plate.
(4) Release the latch, and then disconnect the
connector to take off the paper pusher home
position sensor while pressing the paper
pusher plate.
[G] Front alignment plate home position sensor (S7)
(1) Take off the grate-shaped guide.
 P.4-10 "[N] Grate-shaped guide"
(2) Release the latch, and then disconnect the
connector to take off the front alignment plate
home position sensor.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Paper pusher cam
Bushing
Paper pusher plate
Fig. 4-267
Paper pusher home position sensor
Paper pusher plate
Fig. 4-268
Fig. 4-269
4 - 95
Bushing
Front alignment plate
home position sensor
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4