Toshiba MJ-1104 Service Manual page 89

(6) Remove 3 clips on the rear side of the stack
transport roller-2. Then remove the transport
roller pulley-1, transport roller pulley -2, 2
pins, bushing and belt.
Notes:
• Be sure not to lose the fixing pins for the
pulleys.
• Be sure not to lose the belt.
(7) Remove 2 clips on the rear side of the stack
transport roller-1. Then remove the transport
roller pulley -3, pin and bushing.
Note:
Be sure not to lose the fixing pins for the pul-
leys.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Stack transport roller-2
Transport roller pulley-1
Fig. 4-58
Bushing
Fig. 4-59
Bushing
Clips
Pin
Transport roller pulley-3
Fig. 4-60
4 - 21
Pin
Clips
Clips
Transport roller
pulley-2
Pin
Belt
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4