Toshiba MJ-1104 Service Manual page 120

[H] Buffer roller
(1) Take off the buffer unit.
 P.4-15 "[B] Buffer unit"
(2) Loosen 1 screw, and then tighten the screw
by pushing the plate in the direction of the
arrow. (Loosen the belt tension.)
(3) Disconnect the connector of the buffer tray
guide motor.
(4) Take off the belt of the buffer roller drive
motor.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Belt
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 52
Plate
Fig. 4-144
Connector
Buffer tray guide motor
Fig. 4-145
Buffer roller drive motor
Fig. 4-146