Toshiba MJ-1104 Service Manual page 170

[N] Movable tray paper-full sensor (S16)
(1) Take off the grate-shaped guide.
 P.4-10 "[N] Grate-shaped guide"
(2) Move the shutter upward.
(3) Release the latch, and then disconnect the
connector to take off the movable tray paper-
full sensor.
[O] Movable tray paper exist sensor (S17)
(1) Take off the movable tray.
 P.4-2 "[B] Movable tray"
(2) Disconnect the connector of the movable
tray paper exist sensor.
(3) Release the latch, and then take off the mov-
able tray paper exist sensor.
[P] Stationary tray paper-full sensor (S18)
(1) Take off the stationary tray.
 P.4-1 "[A] Stationary tray"
(2) Hold up the jam access lever. Then remove 1
screw and disconnect the connector to take
off the bracket.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Movable tray paper-full sensor
Sensor brackt
Bracket
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 102
Fig. 4-287
Movable tray paper
exist sensor
Fig. 4-288
Jam access lever
Fig. 4-289