Toshiba MJ-1104 Service Manual page 75

[I] Saddle access cover
(1) Remove 1 screw, and then take off the sad-
dle access cover by sliding it downward.
[J] Right upper cover
(1) Take off the control panel unit.
 P.4-3 "[D] Control panel unit"
(2) Take off the rear cover.
 P.4-6 "[G] Rear cover"
(3) Loosen 2 screws, and then take off the right
upper cover.
Note:
When installing the right upper cover, hang
the 2 hooks of the cover on the hole of the
frame.
[K] Relay guide / Feeding discharge brush / Right cover
(1) Take off the access cover.
 P.4-6 "[H] Access cover"
(2) Loosen 3 screws, and then take off the relay
guide and feeding discharge brush.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-18
Right upper cover
Hook
Fig. 4-19
Fig. 4-20
4 - 7
Saddle access cover
Feeding discharge
brush
Relay guide
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4