(4)
Remove one clip, and then take off the bush-
ing and junction roller.
[C] Paddle-1 / Paddle-2 / Paddle-3 / Catching pad / Paddle-4 / Paddle-5 / Paddle-6
(1)
Take off the stational tray.
P.4-1 "[A] Stationary tray"
(2)
Take off the Junction box unit.
P.4-13 "[A] Junction box unit"
(3)
Close the buffer unit-1 halfway and leave it.
Then remove 1 screw.
(4)
Remove 3 screws, and then take off the
transport guide.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-113
Buffer unit-1
Fig. 4-114
Fig. 4-115
4 - 41
Clip
Bushing
Junction roller
Screw
Transport guide
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4