Toshiba MJ-1104 Service Manual page 45

[F] Folding
The folding blade is pressed onto the center of the stack of paper stapled and moved to the folding
position, and then the folding roller lets the stack of paper sandwich the blade so that the stack will be
folded again.
The folding blade clutch (CLT3) is turned ON to press the folding blade to the stack of paper by rotating
the blade cam driven by the folding motor (M17).
The rotation of the folding motor (M17) is detected by the folding motor encoder sensor (S34).
Folding blade cam
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Folding motor encoder sensor
Folding motor
Folding blade clutch
Folding blade cam
Folding blade
Fig. 3-21
3 - 17
Folding blade
home position
sensor
MJ-1103/1104
DESCRIPTION OF OPERATIONS
3