7.2.2.4
Installing a 2.5-inch HDD/SSD module
Figure 66: Installing the 2.5-inch HDD/SSD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the release lever in the direction of the arrow (2).
7.2.2.5
Concluding steps
Perform the following procedures:
"Performing a RAID array rebuild" on page 78
Ê
CX400 S1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
105