Installing A 3.5-Inch Hdd Module; Concluding Steps - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.3.2.4

Installing a 3.5-inch HDD module

Figure 72: Installing the 3.5-inch HDD module
Ê Insert the HDD module into a drive bay and carefully push back as far as it
will go (1).
Ê Close the release lever in the direction of the arrow (2).
7.3.2.5

Concluding steps

Perform the following procedures:
"Performing a RAID array rebuild" on page 78
Ê
114 Upgrade and Maintenance Manual
CX400 S1