Concluding Steps - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 80: Installing the HDD SAS/SATA backplane (C)
Ê Secure HDD SAS/SATA backplane with two screws (1).
Figure 81: Securing the front panel cable with the cable clamps
Ê Secure both front panel cables with the cable clamps.
7.4.1.5

Concluding steps

Perform the following procedures:
Ê Insert all linking boards as described in section
on page 162.
"Installing the midplane" on page 155
Ê
"Installing the power distribution module" on page 57
Ê
Ê Install both fan modules as described in section
on page 147.
"Installing the power supply module" on page 82
Ê
"Closing the server enclosure" on page 61
Ê
124 Upgrade and Maintenance Manual
"Installing the linking board"
"Installing the fan module"
CX400 S1