Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual page 122

Hard disk drives / solid state drives
Figure 76: Removing the HDD SAS/SATA backplane (A)
Ê Note the positions of the shoulder screw caps (1).
Ê Remove two screws (2) of the defective HDD SAS/SATA backplane.
Figure 77: Removing the HDD SAS/SATA backplane (B)
Ê Slide the HDD SAS/SATA backplane in the direction of the arrow (1) as far
as it will go.
Ê Lift the HDD SAS/SATA backplane out of the chassis (2).
122 Upgrade and Maintenance Manual
CX400 S1