Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual page 46

Basic hardware procedures
The description of following Riftar is applied only to the EMEA
market.
Additionally, a lifter is required in the following cases:
– The server weighs more than 50 kg.
– The server weighs more than 21 kg and is installed above the height
of 25 U.
When using a lifter, this removal procedure needs to be carried out by
maintenance personnel.
Figure 5: Remove the server enclosure out of the rack (A).
Ê Remove the screw on the front bracket.
46 Upgrade and Maintenance Manual
CX400 S1