Hard disk drives / solid state drives
Figure 83: Removing the HDD SAS/SATA backplane (A)
Ê Note the positions of the shoulder screw caps (1).
Ê Remove two screws (2) of the defective HDD SAS/SATA backplane.
Figure 84: Removing the HDD SAS/SATA backplane (B)
Ê Slide the HDD SAS/SATA backplane in the direction of the arrow (1) as far
as it will go.
Ê Lift the HDD SAS/SATA backplane out of the chassis (2).
128
Upgrade and Maintenance Manual
CX400 S1