Concluding Steps - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 87: Installing the HDD SAS/SATA backplane (C)
Ê Secure HDD SAS/SATA backplane with two screws (1).
Figure 88: Removing the front panel cable from the cable clamps
Ê Secure both front panel cables with the cable clamps.
7.4.2.5

Concluding steps

Perform the following procedures:
Ê Insert all linking boards as described in section
on page 168.
"Installing the midplane" on page 155
Ê
"Installing the power distribution module" on page 57
Ê
130 Upgrade and Maintenance Manual
"Installing the linking board"
CX400 S1