7.3.2.3
Removing a 3.5-inch HDD tray
Figure 71: Removing a 3.5-inch HDD tray
I
Empty HDD trays have been installed into unused HDD bays. Before
installing an additional HDD, the empty HDD tray needs to be removed
from the desired drive bay.
Ê Undo the locking mechanism of the release lever (1).
Ê Swing the release lever in the direction of the arrow (2).
Ê Pull out the HDD tray (3).
CX400 S1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
113