4.3
Removing the server enclosure out of the
rack
V
CAUTION!
For ALL service tasks, remove the CX400 S1 server enclosure out of the
rack and put it on a separate desk, except when you remove / install
HDD, PSU and Server Node!
It is not allowed to draw the CX400 S1 server enclosure partially out of
the rack.
4.3.1
Preliminary steps
"Shutting down the server node" on page 41
Ê
"Disconnecting the power cord" on page 42
Ê
Ê If applicable, disconnect all external cables.
Ê If you remove the CX400 S1 server enclosure out of the rack, remove all
HDD, PSU and Server Node from the server enclosure.
CX400 S1
Upgrade and Maintenance Manual
Basic hardware procedures
43