Controls On The Front Panel; Indicators On The Front Panel - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Appendix

13.2.1.1 Controls on the front panel

On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
ID ID button
Lights up (blue) on the front and on the rear of the server when the
ID button is pressed. Both ID indicators are synchronized.

13.2.1.2 Indicators on the front panel

No. Function
1 Power-on
indicator
2 ID
indicator
206
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the multi-node server
system from the mains voltage. To disconnect from the
mains completely, remove the power plug(s).
Status
Green LED: on
Green LED: off
Orange LED flashing Power off and fault
Green/Orange LED:
alternate flashing
Blue LED: flashing
Blue LED: off
Upgrade and Maintenance Manual
Description
Power on
Power off
Power on and fault
Select mode
Normal mode
CX400 S1