Installing The Fan4 - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

8.2.6.1

Installing the fan4

Figure 100: Installing fan4 in the fan holder
Ê Insert fan4 in the right part of the fan holder (1).
I
Take note of the air flow direction (2).
Ê Run the fan cable along the bottom of the fan holder (3).
Ê Pull the fan cable through the recess on the left side (4).
Ê Secure the fan with four screws.
CX400 S1
Upgrade and Maintenance Manual
air flow
System fan
145