Removing The Top Pdb - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

It is not allowed to draw the CX400 S1server enclosure partially out
of the rack.
"Removing the server node from the server enclosure" on page 48
Ê
"Removing the power supply module" on page 84
Ê
"Opening the server enclosure" on page 51
Ê
"Removing the power distribution module" on page 54
Ê
6.5.1.3

Removing the top PDB

Figure 50: Removing top PDB (A)
Ê Remove four screws to loosen the board from the cage.
Figure 51: Removing top PDB (B)
CX400 S1
Upgrade and Maintenance Manual
Power supply
89