Installing The 2.5-Inch Hdd Sas/Sata Backplane - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

7.4.1.4

Installing the 2.5-inch HDD SAS/SATA backplane

Figure 78: Installing the HDD SAS/SATA backplane (A)
Ê Note the positions of the shoulder screw caps (1) and the screw holes (2) on
the chassis.
Figure 79: Installing the HDD SAS/SATA backplane (B)
Ê Insert the new HDD SAS/SATA backplane into the chassis (1):
– The two shoulder screw caps on the chassis rest in the wide end and the
center of the keyhole slots on the HDD SAS/SATA backplane.
– The five noses of the backplane fit behind the guides (see circles).
Ê Slide the HDD SAS/SATA backplane in the direction of the arrow as far as it
will go (2).
CX400 S1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
123