Toro Greensmaster TriFlex 3320/3420 Service Manual page 163

Main Information Screen
The InfoCenter main information screen (Fig. 17) is dis-
played after the initial splash screen has been displayed
for several seconds. During normal machine operation,
the main information screen provides machine informa-
tion for the operator.
The main information screen can be used to monitor en-
gine coolant temperature, engine RPM, generator volt-
age, PTO speed and hour meter reading. The screen
will also identify if the parking brake is applied.
The position of the functional control lever on the con-
sole will be identified on the main information screen as
follows:
D The letter N will be displayed on the InfoCenter
when the functional control lever is in the neutral
position.
D The rabbit icon will be displayed on the Info-
Center when the functional control lever is in the
transport position.
D The turtle icon will be displayed on the Info-
Center when the functional control lever is in the
mow position.
The main information screen will include three (3) ar-
rows to the right of the coolant temperature whenever
the cutting units are either raising (up arrows) or lower-
ing (down arrows).
If an electrical machine fault occurs during machine op-
eration, the InfoCenter fault indicator will blink to notify
the operator. Also, the fault log indicator on the Info-
Center screen will be displayed to notify the operator
that recent machine faults have occurred. Accessing the
fault log is described below in Faults Screen.
The main menu and additional information screens can
be accessed from the InfoCenter main information
screen by pressing and releasing the menu/back button
(left button) on the display. Information on the main
menu and menu item screens is included below.
Greensmaster 3320/3420
9
1
140
2
3
10
1. Coolant temperature
2. Functional control status
3. Parking brake applied
4. Hour meter
5. PTO speed
6. Generator voltage/status
Page 6 - - 13
8
7
2600 52.2V
180
220
n/min
1600
P
248.6
n/min
11 12
Figure 17
7. Fault log indicator
8. Engine RPM/status
9. Fault indicator
10. Menu/back button
11. Down button
12. Right button
Electrical System
6
5
4