Engine; Engine Removal - Toro Greensmaster TriFlex 3320/3420 Service Manual

Engine

FRONT
RIGHT
18
22
28
24
26
21
1
20
1. Engine assembly
2. Muffler assembly
3. Lock nut (4 used)
4. Exhaust pipe
5. Flange head screw
6. Flange nut (4 used)
7. Lock washer (3 used)
8. Exhaust plate
9. Exhaust gasket
10. Flange nut
NOTE: This suggested engine removal procedure al-
lows the hydraulic pump, bell housing and generator as-
sembly to remain in the machine.
Engine Removal (Fig. 11)
1. Park machine on a level surface, disengage and low-
er cutting units, move functional control lever to neutral
(N), engage parking brake, stop the engine and remove
the key from the ignition switch. Wait for all machine
movement to stop.
Diesel Engine
22
11
23
25
11. Flange nut
12. Brace
13. Flat washer (8 used)
14. Cap screw (4 used)
15. Brace
16. Spring (4 used)
17. Muffler shield
18. Flange head screw
19. Alternator assembly
27
3
13
5
9
7
8
6
10
16
19
Figure 11
The engine, radiator, exhaust system and hy-
draulic system may be hot. To avoid possible in-
jury, allow machine to cool before working on the
engine.
2. Disconnect battery cables from battery. Disconnect
negative battery cable first and positive cable last.
Page 4 - - 16
15
17
4
16
13
3
6
12
18
20. V- -belt
21. Fuel/water separator
22. Cap screw (2 used)
23. Engine support
24. Cap screw (4 used)
25. Lock washer (4 used)
26. Lock washer (ground connection)
27. Rear engine mount
28. R- -clamp (air intake hose)
CAUTION
Greensmaster 3420
13
14
2