General Safety Instructions; Before Operating - Toro Greensmaster TriFlex 3320/3420 Service Manual

General Safety Instructions

Greensmaster TriFlex Hybrid 3320 and 3420 machines
have been tested and certified by TORO for compliance
with existing safety standards and specifications. Al-
though hazard control and accident prevention are par-
tially dependent upon the design and configuration of
the machine, these factors are also dependent upon the
awareness, concern and proper training of the person-
nel involved in the operation, transport, maintenance
and storage of the machine. Improper use or mainte-
nance of the machine can result in injury or death. To re-
duce the potential for injury or death, comply with the
following safety instructions.

Before Operating

1. Review and understand the contents of the Opera-
tor's Manuals and Operator's DVD before starting and
operating the vehicle. Become familiar with the controls
and know how to stop the vehicle and engine quickly.
Additional copies of the Operator's Manual are available
on the internet at www.Toro.com.
2. Keep all shields, safety devices and decals in place.
If a shield, safety device or decal is defective, illegible or
damaged, repair or replace it before operating the ma-
chine. Also tighten any loose nuts, bolts or screws to en-
sure machine is in safe operating condition.
3. Assure interlock switches are adjusted correctly so
engine cannot be started unless functional control lever
is in the neutral position.
Safety
To reduce the potential for injury or death, com-
ply with the following safety instructions.
4. Since fuel is flammable, handle it carefully:
A. Use an approved fuel container.
B. Do not remove fuel tank cap while engine is hot or
running.
C. Do not smoke while handling fuel.
D. Fill fuel tank outdoors and only to within an inch of
the top of the tank, not the filler neck. Do not overfill
the fuel tank.
E. Wipe up any spilled fuel.
Page 1 - - 2
WARNING
Greensmaster 3320/3420